SERVO Thermic Fluid (Heat Transfer Oil) Supplier in Karnataka
SERVOtherm heat-transfer oils run the thermic fluid heaters behind textile stenters, plywood and laminate hot presses, chemical reactors and food frying lines. PCG Business Solutions supplies first fills and top-ups of SERVOtherm Medium, Special and Super across Tumakuru, Hassan, Mysuru, Mandya, Ramanagara, Chamarajanagar and Kodagu.
SERVO Thermic Fluids (Heat Transfer Oils) range
| SERVO family / grades | Type | Key specifications (per IOCL) |
|---|---|---|
| SERVOtherm Medium | Mineral heat-transfer oil | Well-designed systems up to 300 °C |
| SERVOtherm Special | Low sulphur, low CCR | Well-designed systems up to 315 °C |
| SERVOtherm Super | Additive-treated premium | Bulk oil temperature up to 315 °C |
Grade names and specifications as listed in IndianOil's SERVO product literature. Ask us for the data sheet of any grade. See the complete SERVO grade chart.
Popular grades with full specification pages
Choosing and caring for a thermic fluid
Pick the grade by your heater's maximum bulk temperature, and never run above IOCL's rated limit. The film temperature at the heater tubes is always higher than the bulk temperature, so good circulation matters. Plywood hot presses and textile stenters in Karnataka typically run a single heater loop. Sample the fluid every year for viscosity, acidity, flash point and carbon residue, and change it before cracking produces light ends and deposits (see the thermic fluid maintenance guide).
Supply across Karnataka
PCG Business Solutions is an authorised IndianOil SERVO stockist. We supply servo thermic fluids (heat transfer oils) from our Tumakuru and Bidadi stock points to plants in all seven of our districts.
In Bengaluru (Bangalore) or elsewhere? PCG is authorised only for the seven districts listed above. If your plant is in Bengaluru or another district, contact us and we will direct you to the right IndianOil channel for your area.
Industries
SERVO Thermic Fluids (Heat Transfer Oils) – FAQs
Plywood hot presses use a mineral heat-transfer oil rated above their operating temperature. SERVOtherm Medium (up to 300 °C) or SERVOtherm Special/Super (up to 315 °C) are chosen according to the heater's maximum bulk temperature.
Yes. Tell us the system volume (heater, expansion tank and piping) and we will quote barrels for the first fill plus a top-up reserve.
