Authorised IndianOil SERVO Stockist 7 Karnataka districts • Stock points at Bidadi & Tumakuru We Are Hiring!
OEM CROSS-REFERENCE

SERVO Equivalent of Mobil DTE 24

The SERVO equivalent of Mobil DTE 24 is Servosystem HLP 32, an ISO VG 32 DIN 51524-2 HLP anti-wear hydraulic oil.

Get today's institutional price for Servosystem HLP 32 Stocked for supply from our Bidadi & Tumakuru stock points. Genuine sealed IndianOil packs with GST invoice.

Side-by-side comparison

Mobil DTE 24

ISO viscosity gradeISO VG 32
DIN 51524-2 HLPYes (per Mobil)
Denison HF-0Yes (per Mobil)

As published by Mobil. Check the current Mobil data sheet.

Servosystem HLP 32

ISO viscosity gradeISO VG 32
KV @ 40 °C (IOCL limit)29 – 35 cSt
VI (IOCL min)100
Flash point (IOCL min)200 °C
DIN 51524 Part 2 HLPYes (per IOCL)
Denison HF-0Yes (per IOCL)
Cincinnati MachinesP-69 and P-70 (per IOCL)

As published by IndianOil — SERVO System HLP specifications.

Outside Karnataka? The technical information on this page applies anywhere in India. PCG Business Solutions supplies SERVO in seven Karnataka districts. If you are in another state, send us your requirement and we will point you to IndianOil's authorised channel for your area, or answer any technical question about the grade.

About Mobil DTE 24

Mobil DTE 24 is the ISO VG 32 grade of the Mobil DTE 20 Series, listed against DIN 51524-2 (HLP) and ISO 11158 (L-HM) with Denison HF-0.

Before you switch

VG 32 is usually specified for precision or cold-start systems. Don't substitute a heavier grade without OEM approval.

Changeover checklist

  1. Confirm the pump/valve OEM requirement: viscosity grade and any named approval such as Denison HF-0, Eaton or Bosch Rexroth.
  2. Mineral anti-wear hydraulic oils of the same class are generally compatible for top-up. For a full change, drain the tank, lines and actuators as far as practical.
  3. Replace or clean filters and the suction strainer. Flush if the old oil was degraded or contaminated.
  4. Refill through a filter cart and bleed air. Check for foaming and seal weeps in the first days.
  5. Take a baseline oil sample after about 50 running hours for trend monitoring.

Need written confirmation for an audit or OEM warranty file? Our application engineers can review your machine manual and confirm the SERVO grade. Request equivalency confirmation.

FAQ

Mobil DTE 24 equivalent – FAQs

Servosystem HLP 32. For general anti-wear duty, Servosystem 32 is also available.

The SERVO equivalent of Mobil DTE 24 is Servosystem HLP 32, an ISO VG 32 DIN 51524-2 HLP anti-wear hydraulic oil.

PCG Business Solutions, an authorised IndianOil SERVO stockist, supplies Servosystem HLP 32 from its Bidadi and Tumakuru stock points across Tumakuru, Ramanagara, Mysuru, Mandya, Hassan, Chamarajanagar and Kodagu.

Mobil DTE 24 and Mobil are trademarks of their respective owners. They are used here only to identify the product being compared. Comparison is based on each manufacturer's published literature. PCG Business Solutions is not affiliated with Mobil.

Call WhatsApp Get Quote