SERVO Equivalent of Shell Tellus 46 (Tellus S2 MX 46)
The SERVO equivalent of Shell Tellus 46 / Tellus S2 MX 46 is Servosystem HLP 46, an ISO VG 46 DIN 51524 Part 2 (HLP) hydraulic oil. Servosystem 46 suits general anti-wear duty without a DIN requirement.
Side-by-side comparison
Shell Tellus 46 (Tellus S2 MX 46)
| ISO viscosity grade | ISO VG 46 |
|---|---|
| Class | Zinc anti-wear hydraulic, DIN 51524-2 HLP |
As published by Shell. Check the current Shell data sheet.
Servosystem HLP 46
| ISO viscosity grade | ISO VG 46 |
|---|---|
| KV @ 40 °C (IOCL limit) | 42 – 50 cSt |
| VI (IOCL min) | 98 |
| Flash point (IOCL min) | 204 °C |
| DIN 51524 Part 2 HLP | Yes (per IOCL) |
| Denison HF-0 | Yes (per IOCL) |
| Cincinnati Machines | P-69 and P-70 (per IOCL) |
As published by IndianOil — SERVO System HLP specifications.
About Shell Tellus 46 (Tellus S2 MX 46)
Shell Tellus S2 MX 46 (earlier Tellus S2 M 46 / Tellus 46) is Shell's ISO VG 46 member of the same DIN 51524-2 HLP anti-wear hydraulic family.
Before you switch
Changeover checklist
- Confirm the pump/valve OEM requirement: viscosity grade and any named approval such as Denison HF-0, Eaton or Bosch Rexroth.
- Mineral anti-wear hydraulic oils of the same class are generally compatible for top-up. For a full change, drain the tank, lines and actuators as far as practical.
- Replace or clean filters and the suction strainer. Flush if the old oil was degraded or contaminated.
- Refill through a filter cart and bleed air. Check for foaming and seal weeps in the first days.
- Take a baseline oil sample after about 50 running hours for trend monitoring.
Need written confirmation for an audit or OEM warranty file? Our application engineers can review your machine manual and confirm the SERVO grade. Request equivalency confirmation.
Shell Tellus 46 (Tellus S2 MX 46) equivalent – FAQs
Servosystem HLP 46 where the machine specifies DIN 51524-2. Otherwise Servosystem 46 is the usual ISO VG 46 anti-wear grade.
The SERVO equivalent of Shell Tellus 46 / Tellus S2 MX 46 is Servosystem HLP 46, an ISO VG 46 DIN 51524 Part 2 (HLP) hydraulic oil. Servosystem 46 suits general anti-wear duty without a DIN requirement.
PCG Business Solutions, an authorised IndianOil SERVO stockist, supplies Servosystem HLP 46 from its Bidadi and Tumakuru stock points across Tumakuru, Ramanagara, Mysuru, Mandya, Hassan, Chamarajanagar and Kodagu.
Shell Tellus 46 (Tellus S2 MX 46) and Shell are trademarks of their respective owners. They are used here only to identify the product being compared. Comparison is based on each manufacturer's published literature. PCG Business Solutions is not affiliated with Shell.
